AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does Heat Pump Installation Cost in Glendale?
Heat pump installation in Glendale typically costs between $3,500 and $7,500 for a complete system, with most single-family homes landing in the middle of that range. The final number depends on system size, whether ductwork needs sealing or extending, and whether your home is switching from a furnace and traditional AC setup for the first time. We set the exact price per job with a free written estimate, and that written estimate is what you pay.
A heat pump moves heat instead of generating it, which is why it handles both cooling and heating in one unit. In Glendale’s climate that single-unit design makes a lot of sense: mild winters mean the system rarely runs at full heating capacity, and long warm stretches mean the cooling side carries most of the load. Our technicians have up to 15 years of experience installing and servicing these systems across every major manufacturer, so you get straight answers about what your home actually needs. Jasper AC Repair connects Glendale homeowners with independent local HVAC professionals, and every recommendation starts with your existing equipment, not a brand quota.
- Cooling and heating, handled: one system instead of two, one contractor instead of a handoff.
- Brand-neutral advice: we work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, so the unit we recommend fits your house and your budget.
- Free estimates with upfront pricing in writing.
- Same-day service available on many jobs, with fast dispatch from 7am to 7pm.
Heat Pump Installation Cost Breakdown (2026)
These are typical estimated ranges for the Glendale market in 2026. Actual pricing depends on your home’s size, layout, and the condition of your existing ductwork. The written estimate always sets the final price.
| Line item | Typical estimated range |
|---|---|
| Standard single-zone heat pump (2-3 ton), equipment and labor | $3,500 – $7,500 |
| Duct sealing or minor duct repair | $300 – $900 |
| New thermostat (programmable or smart) | $150 – $400 |
| Electrical work to support the new unit | $250 – $800 |
| Removal and haul-away of old equipment | $100 – $300 |
| Permit and inspection fees | Varies by city; ask your building department |
For comparison, AC installation runs $3,500 – $7,500, furnace repair $150 – $700, AC repair $150 – $650, and a tune-up $80 – $200. A heat pump sits at the higher end of that range because you’re installing one system that does the work of two. If you’re weighing a heat pump against keeping separate heating and cooling equipment, the math usually favors the heat pump on a new installation and gets closer to even on a replacement where the furnace is still healthy.
What pushes cost up: larger tonnage for bigger or poorly insulated homes, ductwork that needs real repair rather than sealing, an electrical panel that can’t support the new circuit, and complex refrigerant line runs. What pulls it down: a straightforward swap where the existing electrical service and ductwork are already in good shape.
What Affects Heat Pump Installation Pricing in Glendale
- System size and home square footage. A 1,200-square-foot bungalow and a 2,600-square-foot house need different tonnage, and equipment cost scales with capacity. We size the system to the home rather than rounding up “just in case,” which keeps both the equipment cost and your energy bill lower.
- Ductwork condition. Glendale homes range from mid-century builds with original ductwork to newer construction with sealed, insulated runs. Leaky ducts waste a heat pump’s efficiency, so duct sealing is often part of the job, and it’s money well spent.
- Electrical capacity. Heat pumps draw more power than a gas furnace. If your panel has room for the new circuit, this is a minor line item. If it doesn’t, the electrical work grows, and we’ll tell you that up front rather than after the fact.
- Whether you’re converting from gas heat. Switching from a furnace means capping or removing gas lines and reconfiguring the air handler location. It’s a bigger job than replacing an existing heat pump, and we plan the transition so you’re not left without heat in between.
- Refrigerant line routing. Moving an outdoor unit to a different wall or roofline changes the length of the refrigerant lines and the amount of labor involved. Keep the unit near its current location and you keep the cost down.
- Thermostat and controls. A basic programmable thermostat is inexpensive. A smart thermostat with zoning capability adds cost but can pay back in comfort and efficiency, especially in homes with rooms that run hot or cold.
Glendale’s climate is a factor worth naming. Winters are mild, so the heating side of a heat pump spends most of its life at partial load, which is exactly where these systems are most efficient. Summer afternoons in the valley push the cooling side harder, and that’s where correct sizing and sealed ducts matter most. A system that’s oversized for the cooling load short-cycles, wears faster, and doesn’t dehumidify as well. Getting the sizing right is the single biggest thing we can do to protect your investment.
How to Save on Heat Pump Installation
The biggest savings come from planning the job rather than reacting to a failure. A heat pump that dies in July gives you fewer options than one you replace on your own schedule.
- Get the estimate in writing before work starts. A written estimate locks in the scope and the price, and it lets you compare quotes on equal terms. Free estimates are standard with us.
- Bundle duct work into the same visit. If your ducts need sealing, doing it during installation avoids a second trip and a second labor charge.
- Ask about equipment tiers, not brands. Because we service nine major manufacturers, we can match a unit to your home’s load instead of steering you toward whatever brand pays the highest margin. Sometimes the mid-tier unit is the right call, and we’ll say so.
- Keep your existing thermostat if it’s compatible. A working smart thermostat doesn’t need replacing just because the system is new.
- Address small issues before they compound. A tune-up runs $80 – $200. Catching a failing component early often costs far less than the repair that follows a full breakdown.
Call (855) 473-8857 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening.
Repair or Replace: How to Decide
If your current heat pump is more than a decade old and facing a major repair, replacement usually wins on total cost. The rule of thumb in the trade is simple: when a repair approaches half the cost of a new system, and the equipment is already past its expected service life, putting that money into a new unit makes more financial sense. A compressor replacement on an aging system is the classic example. You pay a large sum and still own a system with the same remaining lifespan.
On the other hand, a younger system with a failed capacitor, contactor, or blower motor is worth repairing. Those are modest fixes, and the rest of the equipment still has years left. We’ll give you the honest read on which situation you’re in, including the repair cost estimate and the replacement range, so you can compare them side by side. That’s the same conversation we have about Glendale furnace systems when a repair no longer makes sense, and it’s the reason we handle full furnace replacement rather than only patching things up.
What to Expect During a Heat Pump Installation
A typical residential installation takes one to two days, depending on ductwork and electrical scope. The process usually looks like this:
- Load calculation and site check. We measure the home, check insulation and window performance, and confirm the electrical service can support the new unit.
- Permits. Most cities require a permit for HVAC replacement, so ask your city’s building department what applies to your address. We’ll walk you through what’s needed.
- Removal of old equipment. The existing unit and any obsolete refrigerant lines come out, and we haul everything away.
- Installation. The outdoor unit, indoor air handler, refrigerant lines, drain line, and thermostat go in. Duct sealing happens here if it’s part of the scope.
- Testing and commissioning. We charge the system, check pressures and airflow room by room, and confirm the heating and cooling cycles both work as designed.
- Walkthrough. You get a plain explanation of the thermostat settings, filter schedule, and what to watch for in the first season.
Safety matters on the electrical side of this work. Heat pump installation involves 240-volt circuits, refrigerant handling, and in a gas-to-electric conversion, capping a gas line. Those are jobs for a trained, licensed technician. We don’t recommend homeowner work on electrical panels or gas lines, and we won’t talk you through it over the phone. That’s not caution for its own sake; it’s the difference between a safe install and a dangerous one.
Why Brand-Neutral Matters for Heat Pump Pricing
Whatever brand you have, we know it. We’re certified to work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, which means you won’t hear “we don’t service that unit” when the technician arrives. More importantly for pricing, it means the recommendation is driven by your home’s load and your budget. A technician who only sells one brand has one answer to every question. A technician who services nine has nine, and can be honest about which one fits your house.
We also handle the full equipment lifecycle. AC installation on the cooling side, furnace repair and complete furnace replacement on the heating side, and heat pump installation for homeowners who want one system for both. One company. Both seasons. You’re not handed off to another contractor mid-project, and you’re not juggling two warranties.
FAQs – Heat Pump Installation Cost
How much does heat pump installation cost in Glendale?
Heat pump installation in Glendale typically costs $3,500 – $7,500 for a complete residential system, with the exact figure set by a written estimate after a load calculation and duct inspection. Add $300 – $900 if duct sealing is needed and $250 – $800 for electrical work if your panel needs a new circuit. Call (855) 473-8857 for a free quote. Estimates are free.
Is it cheaper to repair or replace a heat pump?
Repair is cheaper when the fix is a minor component like a capacitor or blower motor, usually $150 – $650. Replacement makes more sense when a major component fails on an aging system and the repair approaches a large share of the $3,500 – $7,500 installation range. We’ll give you both numbers so you can compare. Call (855) 473-8857 for an exact quote.
Can you install a heat pump the same day?
Same-day service is available on many installation jobs, though most full heat pump installs take one to two days once scheduled. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. We’re closed Saturday. Call (855) 473-8857 to book a free estimate.
Do I need a permit for heat pump installation in Glendale?
Most cities require a permit for HVAC replacement, so ask your city’s building department about your address before scheduling. Permit fees vary and are typically added to the job total. We can walk you through the permit process and include it in the written estimate. Call (855) 473-8857 to get started.
How much does a heat pump tune-up cost in Glendale?
A heat pump tune-up typically costs $80 – $200 in Glendale, and it’s the least expensive way to protect a new installation. Regular servicing keeps efficiency up and catches small issues before they become $150 – $650 repairs. Call (855) 473-8857 for a free estimate.
Get a Free Heat Pump Estimate in Glendale
If you’re weighing a heat pump against your current setup, the fastest path to a real number is a free written estimate. Call (855) 473-8857 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Whether your existing equipment is a Carrier, a Rheem, a York, or anything else on the nine-brand list, we’ll size the job honestly, explain what drives the price, and put it in writing before any work begins.
Written by the team at Jasper AC Repair.
Pricing reflects the Glendale market as of 2026. Jasper AC Repair offers free estimates – call (855) 473-8857.
What Our Customers Say
"New system install, two days, and they were careful with the floors and the attic access the entire time. Registered the warranty for me and emailed the paperwork."
- Oscar Flores"Ductwork in the attic had a disconnected run that had been dumping cold air into the insulation for who knows how long. He found it, resealed it, and one bedroom that was always hot is now normal."
- Beatriz Martinez"Contactor was pitted and chattering. Cheap part, quick fix, and he showed me the burn on the old one so I could see for myself."
- David Lin